Fluid coupling

Fluid coupling:-

A fluid coupling is a hydrodynamic device used to transmit rotating mechanical power.It has been used in automobile transmissions as an alternative to a mechanical clutch. It also has widespread application in marine and industrial machine drives, where variable speed operation and/or controlled start-up without shock loading of the power transmission system is essential.

A fluid coupling consists of three components, plus the hydraulic fluid:

>The housing, also known as the shell(which must have an oil tight seal around the drive shafts), contains the fluid and turbines.
>Two turbines (fan like components):
*One connected to the input shaft; known as the pump or impeller, primary wheel input turbine
*The other connected to the output shaft, known as the turbine, output turbine, secondary wheel or runner

The driving turbine, known as the 'pump', (or driving torus) is rotated by the prime mover, which is typically an internal combustion engine or electric motor. The impellor's motion imparts both outwards linear and rotational motion to the fluid.

The hydraulic fluid is directed by the 'pump' whose shape forces the flow in the direction of the 'output turbine' (or driven torus). Here, any difference in the angular velocities of 'input stage' and 'output stage' result in a net force on the 'output turbine' causing a torque; thus causing it to rotate in the same direction as the pump.

Fluid couplings are relatively simple components to produce. For example, the turbines can be aluminum castings or steel stampings, and the housing can also be a casting or made from stamped or forged steel.